Skip to Content

Home›Projects

Industrial automation projects with Arduino PLCs

An Arduino PLC project starts from your signal list and ends with an M-Duino or Ardbox running on site. Each project on this page shows the problem, how it is solved and the hardware it uses.

  • Try it in a simulator, in the browser and without hardware.
  • Build it from a project pack or a recipe with tested code.
  • Talk to us: Industrial Shields engineers help you choose the model and get started.
Your signalsand the jobSimulatortry the logicArduino PLCwith tested codeOn siteinstalled

How a project works with us

Four steps, from the first message to the first controller on site.

  1. Send your signal list

    Inputs, outputs, sensors and what the system must do. A rough list is enough to start.

  2. Try a similar process

    Run the closest simulator and break things on purpose: network cuts, faults, peaks.

  3. Start from tested code

    Take a project pack or a recipe from the PLC Solution Library and adapt it.

  4. Choose the model

    We check the I/O count and the communications with you and you get a quote.

Industrial Shields engineers answer your questions from the first contact. The wiring and the start-up on site are done by your team or your integrator.

Projects with M-Duino and Ardbox

Seven projects with a real problem behind them. Each card links the simulator, the code and the installations where it already runs.

M-Duino · Modbus RTU and TCP

Modbus plants with drives, chillers and meters

The problem

Drives, chillers and flow meters speak Modbus RTU, while the plant system needs one clean view over TCP.

How it is solved

An M-Duino works as Modbus TCP slave and RTU master: it polls the RS-485 devices and exposes one register map.

Ask about this projectRequest a quote

Resources for your project

Free material to design, test and supervise the project before you order anything.

Free course · 9 lessons

Build the SCADA for your project with Node-RED

Your PLCs send data over MQTT or Modbus. This course shows how to turn that data into screens, alarms and history with Node-RED.

Start the course

SCADA · Node-RED

Send us your project

Tell us what the system must do and which signals it has. An Industrial Shields engineer will answer with the model and the next steps.

Project:

Thank you. We have received your project and an engineer will contact you.

Prefer email or phone? Use the contact page.

Send us your project