The IS.ACANTO10-0.5k is a DIN rail feed-through terminal block with a 500 Ω resistor (±1 %). It turns the current of a 4-20 mA loop into 2-10 V, so a 0-10 V analog input of an Arduino-based PLC can read the signal.
Reference (SKU): IS.ACANTO10-0.5k.
Technical Specifications
Resistor for DIN Rail 500Ohms 4-20mA to 0-10Vdc ( include 1 units):
PT 4 Feed-Through and Multi-Conductor Terminal Blocks
50% less insertion force
Resistor tolerance +/- 1%
Compact design and front connection facilitate wiring in the smallest of spaces
Tool-free wiring of conductors with ferrules or solid conductors
Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2)
Actuation lever opens the terminal point, so there is no direct contact with live parts
Double bridge shaft enables individual potential distribution and supply
Feed-through terminal block with a 500 Ω resistor (±1 %). It turns the current of a 4-20 mA loop into 2-10 V for a 0-10 V analog input of an Arduino-based PLC.
Frequently asked questions
How does the IS.ACANTO10-0.5k convert 4-20 mA to 0-10 V?
It places a 500 Ω resistor (±1 %) in the 4-20 mA loop. The loop current becomes 2-10 V, which a 0-10 V analog input can read.
Which controllers can use it?
It is made for the 0-10 V analog input of an Arduino-based PLC.
How accurate is the resistor?
Its tolerance is ±1 %.
How do I wire it?
Conductors with ferrules and solid conductors connect without tools. Stranded conductors with ferrules go in directly with PIT 2.5 (from 0.34 mm²) and PIT 4 (from 0.5 mm²). An actuation lever opens the terminal point, so there is no direct contact with live parts.
How many units are included?
One unit.