Technical Details

M-DUINO PLC Arduino Ethernet 42 I/Os Analog/Digital PLUS

BACK TO THE PRODUCT
INITIAL INSTALLATION
INPUTS & OUTPUTS
COMMUNICATIONS
SPECIAL FUNCTIONS

Initial Installation

ARDUINO IDE

Arduino IDE is the Original platform to program Arduino boards. This cross-platform application is available on Windows, macOS and Linux and under the GNU General Public License.
Arduino IDE supports C and C++ code structuring. Industrial Shields recommend using Arduino IDE to program Arduino Based PLC’s, but any Arduino compatible software are compatible with Industrial Shields Controllers.

Apart from that, Industrial Shields bring the possibility to select your Arduino based PLC into your Arduino IDE and compile your sketches for the different PLC’s.

Download the Arduino IDE 1.8.6: 

Windows Installer

MAC OSX

Install Industrial Shields units to Arduino IDE:

Industrialshields boards

Inputs & Outputs

ANALOG INPUTS

Voltage variation  between –Vcc (or GND) and +Vcc, can take any value. An analog input provides a coded measurement in the form of a digital value with an N-bit number.  In Digital and Analog I/O there’s self insulation, so its posible to connect them in a different power supply than 24 V.  

Inputs: (12x) Analog (0-10Vdc) /Digital (5-24Vdc) configurable by software

To know more about analog inputs...  

TYPICAL CONNECTION

DIGITAL INPUTS

Voltage variation  from  –Vcc (or GND)  to  +Vcc, with no intermediate values. Two states: 0 (-Vcc or GND) and 1 (+Vcc).  In Digital and Analog I/O there’s self insulation, so its posible to connect them in a different power supply than 24 V.  

Inputs: (12x) Analog (0-10Vdc) /Digital (5-24Vdc) configurable by software

              (14x) Digital Isolated (5-24Vdc). 

All digital inputs are PNP.

To know more about digital inputs...


TYPICAL CONNECTION


- Digital Isolated Input


 

- Digital No Isolated Input


INTERRUPT INPUTS

Interrupt Service Rutine.  A mechanism that allows a function to be associated with the occurance of a particular event. When the event occurs the processor exits immediately from the normal flow of the program and runs the associated ISR function ignoring any other task. 


Interrupt Pin Arduino Mega Pin MDuino
INT0 2 I0.5/INT0
INT1 3 I0.6/INT1
INT0' 18 I1.5/INT0
INT1' 19 I1.6/INT1


    - I0.5/INT0 and I0.6/INT1 also as Pin3 and Pin2. Enable Interrupts turning ON the switches number 3 and 4 of down communication switches.
    - I1.5/INT4 and I1.6/INT5 also as Tx1 and Rx1. Enable Interrupts turning ON the switches number 1 and 2 of up communication switches.

To know more about interrupt inputs...

TYPICAL CONNECTION

Code example 

In this example we activate INT0 using pin I0_5 from M-duino board. When there’s a change   

#define INTERRUPT I0_5 //other pins: I0_6, I2_6, I2_5, I1_6, I1_5 (M-Duino) I0_0, I0_3, I0_2, I0_1 (Ardbox)

volatile bool state = false;

void setup() {
  pinMode(INTERRUPT, INPUT_PULLUP);
  attachInterrupt(digitalPinToInterrupt(INTERRUPT), function_call_back, CHANGE);
}

void loop() {
  if (state == true){
    Serial.println("Interrupt activated");
    state = false;
  }
}

void function_call_back(){ //Change led state
  state = true;
}