Look for in our Blog. You will find multiple applications, solutions, code examples. Navigate using the tag cloud or search using specific criteria

External interrupt using hall effect sensor sensor with Arduino based PLC

Introduction

The M8 3-pole hall effect sensor is a sensor used to detect metal and magnetic fields. This sensor is digital, and normally must be handled with interrupts. In this case example is showed how to use this sensor using external interrupts with Arduino based controllers.

Requirements

  • Hall Effect Sensor


Connections

Final Connection: 

Odoo CMS - a big picture

Software

This simple sketch allows us to perform digital reading counting of the Hall Effect Sensor every 1 sec. For this we have used the input I0.5 of our M-Duino 21+. I0.5 allow external interrupt functionality, so we must add the attachInterrupt() function to set the interrupt functionality. 

As a test we will check the result monitored by the serial port, open the serial monitor to see the counting levels.

/*
   Copyright (c) 2018 Boot&Work Corp., S.L. All rights reserved

   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU Lesser General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

////////////////////////////////////////////////////////////

volatile int counter = 0;

void setup() {
   Serial.begin(9600L);
   attachInterrupt(digitalPinToInterrupt(I0_5), count, RISING);
   Serial.println('Hall Effect Sensor started');
}

////////////////////////////////////////////////////////////

void loop() {
  Serial.println(counter);
  delay(1000); 
}

void count() {
  counter+=1;
}

Do you want more information?

Open Source technology allows you to develop your installations.

Just fill the form and we will contact you as soon as we can.

Send