Skip to Content
Know-How

Know-How

One topic, one clear result, a few minutes. The concept works for any range, and each page links to the details of your PLC.

Responsible Joan F. Aubets - Industrial Shields
Last Update 20/11/26
Completion Time 6 minutes
Members 2
LoRa works on the desk, fails in the field: 6 checks before you install
LoRa works on the desk, fails in the field: 6 checks before you install
LoRa link that works on the bench but not on site? Check radio settings, antenna, placement, RSSI and SNR on site, spreading factor, airtime and retries, in this order.
Communications
View all
New Content
LoRa works on the desk, fails in the field: 6 checks before you install
LoRa works on the desk, fails in the field: 6 checks before you install
Preview
LoRa link that works on the bench but not on site? Check radio settings, antenna, placement, RSSI and SNR on site, spreading factor, airtime and retries, in this order.
New Content
4G PLC not connecting: 6 checks before blaming the code
4G PLC not connecting: 6 checks before blaming the code
Preview
PLC with a 4G, LTE-M, NB-IoT or GPRS modem that does not connect? Check the SIM, the technology, the antenna, the signal, the registration and the APN, in this order.
New Content
Modbus RTU timeout: 6 checks before blaming the wiring
Modbus RTU timeout: 6 checks before blaming the wiring
Preview
Modbus RTU master getting a timeout from a slave? Check the address, serial settings, single master, response timeout, exception codes and the physical layer, in this order.
Programming
View all
New Content
Upload fails: 6 checks before blaming the code
Upload fails: 6 checks before blaming the code
Preview
¿La carga a un PLC Arduino o ESP32 falla con not in sync o Failed to connect? Revisa el cable, el puerto, el driver, las boards, el arranque del ESP32 y el puerto ocupado.