Short Videos
View all
How to optimize the performance of data center with Arduino PLC, Raspberry PLC or ESP32 PLC
Free preview
In this video we want to show you the importance of monitoring your data center installation.
There are several key indicators (KPIs) that must be analyzed and acted on to obtain the best performance and it can be done with a good installation of sensors and the use of industrial Arduino PLC, Raspberry PLC or ESP32 PLC.

You need to monitorize at plant level, cabinet or server rack level and also each one of the units.

The monitoring of critical elements such as:

- temperature
- humidity
- space available
- tension points or hot spots
- energy consumption
are important to know if your installation is efficient and where it can be improved.

Read more in our website
https://www.industrialshields.com/202010-monitoring-control-data-center-arduino-plc-lp
How to connect an HMI Screen using Arduino PLC
Free preview
Configuring an HMI Kinco Screen using an Industrial Shields industrial controller Arduino using Modbus communication.

You can find more information in this Blog post.
https://www.industrialshields.com/blog/arduino-industrial-1/post/how-to-connect-an-hmi-screen-using-arduino-plc-262


Remember giving a like and subscribing to our Youtube channel to keep in touch!

------------------------------------------------------------------------------------------------------------------------------------------------


📌 Check our official website to know more about our products: https://www.industrialshields.com/

------------------------------------------------------------------------------------------------------------------------------------------------


📚 Check our blog for more information and examples: https://www.industrialshields.com/blog/industrial-shields-blog-1


☑️ Follow us on Twitter: https://twitter.com/indshields

☑️ Follow us on Facebook: https://es-es.facebook.com/pg/industrialshields

☑️ Follow us on Linkedin: https://linkedin.com/company/industrialshields
▷ How to Use the SoftwareSerial library in Arduino for industrial uses (Examples included)
Free preview
Industrial Shields is a worldwide leader in the use of Industrial Technology based on Open Source licenses using Arduino, Raspberry Pi or other Open Source platforms available in the market.

✅ This video shows a summary of the updated post made by our technical team. You will understand how the softwareserial library for Arduino can be used and what is the difference between softwareserial.h and hardwareserial.h.

You can see the post on the link below:
https://www.industrialshields.com/blog/arduino-industrial-1/post/usando-la-libreria-software-serial-en-plcs-de-industrial-shields-99
-------
Other interesting links:
Join the Channel:
https://www.youtube.com/channel/UCdQn1Fwb-yc6UvQD_V-KJkA

Free Arduino course::
https://www.industrialshields.com/programming-arduino-on-industrial-environments-course-10-chapters

Arduino Industrial Controller(Arduino based PLC):
ARDBOX Family:
https://www.industrialshields.com/industrial-plc-based-on-arduino-original-boards-automation-solutions-20ios
ETHERNET Family:
https://www.industrialshields.com/industrial-plc-based-on-arduino-original-boards-automation-solutions

SUMMARY of the post:
What is Arduino Serial Communication and How to use it.
There are different types of Serial Communications. When you use an Arduino board in a project, you can choose the standard Serial pins such as Rx, Tx, from the UART inside the Arduino board, so it is called Serial TTL. In that case, you will use the Hardwareserial.h library but there are some additional pins that can work as an Rx or Tx. For example, the SPI communication pins can work as a MISO, MOSI and Select (SC), but they are also pins that can work as a digital input or digital output, or if you need you can use those pins as Rx, Tx using the library softwareserial.h.

Serial communications allow you to connect two different devices sending and receiving data between them.

The Serial TTL port can be transformed as required in the Industry as a RS232 and as a RS485. When RS232 is used, the functionality is quite similar to working as Serial TTL but, if you work with RS485, you can configure a network using a Master device that is capable of connecting to Slave devices. So the number of devices has been increased from 2 to 32 devices (nodes). And the maximum distance between them can be up to 1220m if the wiring is well done and EMC compliant and electrical noise is avoided.

To sum up, if you are using the UART serial port from the Arduino or from the Arduino based PLC for Industrial projects, the use of other pins working as a Serial TTL can help you with the successful development of your project. So, that additional serial port must be programmed using softwareserial.h library.

If the hardwareserial library can not be used because you need to use a communication protocol that requires the use of a physical UART instead of a virtual serial port, then, you could convert the RS232 or RS485 standard from the device to a Serial TTL. (This example will be shown in another post).

In this post, we explain the advantage of the SoftwareSerial library to simulate a serial port through Software (virtual serial TTL) using the Arduino IDE.

-------------------------------------------------- -------------------------------------------------- --------------------------------------------



📌 Please see our official website for more information about our products: https://www.industrialshields.com/



-------------------------------------------------- -------------------------------------------------- --------------------------------------------



📚 Check out our blog for more information and examples: https://www.industrialshields.com/blog/arduino-industrial-1



☑️ Follow us on Twitter: https://twitter.com/indshields



☑️ Follow us on Facebook: https://www.facebook.com/industrialshields/



☑️ Follow us on Linkedin: https://es.linkedin.com/company/industrialshields
How to open a 10IOs Digital Module Arduino or ESP32 PLC
Free preview
You can see how easy is to open the 10IOs module PLC (based on Arduino NANO or ESP32) in order to configurate the module using the jumpers.

Public information of interest. Subscribe to see the updates first!