Skip to Content
  1. All products
  2. PLC
  3. RASPBERRY PLC
  4. RASPBERRY PLC CPU-Gateway FLEX
  5. RASPBERRY PLC
Pricelist: Public Pricelist Pricelist
Pricelist: Public Pricelist Pricelist

RASPBERRY PLC CPU-Gateway FLEX

Raspberry Pi PLC CPU without local I/O, with two Ethernet ports, two RS-485 ports, Wi-Fi, Bluetooth LE and a UPS: a Linux edge controller and gateway for DIN rail.

Configurable: 2, 4 or 8 GB RAM, plus one CAN, LoRa or 4G board.

Comms
2 x Ethernet, 2 x RS-485, Wi-Fi, Bluetooth LE, I2C, SPI
Built in
UPS for safe shutdown, real-time clock
Software
Debian 64-bit: Python, Node-RED, Docker
Power
12 to 24 Vdc, DIN rail, IP20
Specifications, documents and projects
463.76 € 463.76 €

  • # CPU Type #
  • #CPU Type#
  • # Device #
  • Communication board 1
  • Communication board 3
Add to cart
Contact Us
# CPU Type #: Raspberry Pi
# Device #: PLC
Communication board 3: No Additional Com. Board 3


Raspberry PLC CPU-Gateway: Raspberry Pi edge controller with dual Ethernet and dual RS-485

The Raspberry PLC CPU-Gateway is the Raspberry PLC processing module from Industrial Shields without local I/O zones. It has two Ethernet ports, two RS-485 ports, Wi-Fi, Bluetooth LE, USB, a real-time clock and a UPS that shuts Linux down safely on power loss. It runs Debian 64-bit, so it works as an edge controller, Modbus or MQTT gateway or data concentrator programmed in Python, Node-RED or C/C++.

You are viewing the FLEX version. Configurable: 2, 4 or 8 GB RAM, plus one CAN, LoRa or 4G board.

See CORE Standard configuration, ready to ship

Documents

Datasheets

Certificates

Brochures

Technical specifications

ComputerRaspberry Pi 4, Broadcom BCM2711 quad core 64-bit, 1.8 GHz
RAM2, 4 or 8 GB, chosen when you configure it
Operating systemDebian Bookworm 64-bit, preinstalled
Ethernet1 x Gigabit and 1 x 10/100, RJ45
Serial and buses2 x RS-485 half duplex with 120 Ω termination, TTL serial, I2C, SPI
Wireless and USBWi-Fi, Bluetooth LE, 2 x USB 2.0, 2 x USB 3.0
ReliabilityUPS with supercapacitors for safe shutdown, DS3231 real-time clock with battery, external heatsink
Power supply12 to 24 Vdc with polarity protection
Environment0 to 50 °C operating, 10 to 90 % humidity without condensation
Mounting and protectionDIN rail TS35, IP20, inside a cabinet
ExpansionOne optional board: CAN, LoRa (EU, US or Asia band) or 4G (LTE-M/NB-IoT or LTE Cat 4)
AntennaExternal antenna available on request

Projects you can run on Raspberry PLC CPU-Gateway

Field-tested examples with code from the PLC Solution Library.

See all projects in the PLC Solution Library

Before you choose the Raspberry PLC CPU-Gateway

How much RAM does it have?

You choose 2, 4 or 8 GB when you configure it.

How do I program it?

It ships with Debian 64-bit. Connect by SSH to 10.10.10.20 (eth0) and use Python, Node-RED, C/C++ or shell scripts. Industrial Shields libraries give direct access to the inputs and outputs.

Can I add I/O to it?

Yes. Add remote I/O over Modbus RTU with moduleX, or choose a Raspberry PLC model with local I/O such as the 21 or 38R.

What happens on a power failure?

The built-in UPS keeps the Raspberry Pi running long enough to shut Linux down cleanly, so the SD card and your data are not corrupted. The real-time clock keeps the time with its own battery.

Can it do CAN, LoRa or 4G?

Yes, with one optional expansion board: CAN, LoRa or 4G (LTE-M/NB-IoT or LTE Cat 4).