Cannot seem to acces to the Real-Time Cloc (RTC) on the M-Duino 19R+. Even am I2C scanner cannot pick up its address.
0
1 Answer
0
Best Answer
Dear consumer,
It's so strange that the I2C scanner does not show the RTC internal address but that the internal RTC can be also working.
The only reason I see possible is that the red switches that enable the I2C towards the outside of the equipment are disabled (see image)
Also check the following link as it is a practic example of the RTC usage and also the SD data storage:
https://www.industrialshields.com/es_ES/blog/arduino-industrial-1/post/mduino-rtc-sd-storage-196
I hope I have solved your problem.
I hope I have solved your problem.