I want to interface Mduino58 with SR2000 bar code reader , but i cannot reach to communicate ,
I'm really stick , i have tried a lot a things but nothing works.
On Mduino 58 the RS232 is a reel or we have to inferface with an additionnal boards.
First of all make sure to have installed the Industrial Shields boards to correctly work with our industrial PLC's. On the following link you can check how to set up all the initial configurations.
Also check that all the switch configurations are set up correctly for working with the RS232 configuration. On the following blogs there is all the information explained with all the details.
Make sure that you are using the RS232.h library. Also, we provide some examples for starting with the RS232 that you can found on the Arduino IDE Industrial Shields examples.
Acerca de esta comunidad
Herramientas de las preguntas
|Preguntado: 17/11/20 11:01|
|Visto: 37 veces|
|Última actualización: 17/12/20 6:11|