Introduction
In this post, it will be seen how to calculate the value raised to a power. Basically, this function takes a number(base) and it raises to another number(exponent).
The function for calculating the value raised to a power using Arduino IDE is pow(). This function is used to raise a number to a certain exponent.
Function
pow(base, exponent)
Parameters
base: the number (float)
exponent: the power to which the base is raised (float)
Example
float i=0;
long result;
void(setup){
Serial.begin(9600L);
}
void(loop){
Serial.println("Base 2: ");
for(i=0;i<50;i++){
result=pow(2,i);
Serial.println(result);
}