Control your installations through Open Source Platforms

Using industrial controller ready to be used on industrial environments, you can manage your installations through Open Source Platforms, and it is not necessary to pay any licenses. Controller Arduino can be connected with all sensors to detect all the indicators on water treatment installations.

There are different software platforms available: software to program the PLC Arduino and software to monitor all installations and data acquisition.

Using industrial Arduino offers enough flexibility according to the needs of water treatment.

Using Original Arduino boards, it might not be possible to connect all kinds of sensors to detect water properties; but with Arduino and Raspberry Pi based controllers and Panel PCs, it is possible to connect those sensors in compliance with industrial requirements.

Analog sensors can be connected to measure pH, chlorin, turbidity and other key factors determining water quality.

Usually it is necessary to connect some tank levels sensors -digital or analog- just to ensure that there are enough chemical product to control water quality properties. This helps to continuously monitor the installation.

Using Analog outputs, you can regulate the speed of the dosing pump, ensuring the right dose.

Sometimes just switching on or switching off pumps using relays inside PLCs, you can dose the right quantity of chemical product.

It is possible to connect electrovalves to open/close water or chemical product circuit.