M-DUINO PLC ARDUINO 57AAR
M-DUINO PLC ARDUINO 57AAR
PLUS version includes
Full/Half duplex RS485 port.
µSD Socket
Work directly with the SD memory card.
MODBUS RTU
Possibility to use MODBUS RTU using RS485 port working as a hardware Serial. - RTC (Real-time clock available)
Description
Inputs, Outputs, Communications and other technical specifications.
Inputs (Arduino Mega included)
– 32 Inputs:
(16x) Analog (0-10Vdc, 10bit) / Digital (5-24Vdc) Inputs configurable by software.
(6x) Interrupt Inputs (5-24Vdc). “Can work like Digital Input (24Vdc)”
(10x) Isolated Digital Inputs (5-24Vdc)
Communications
– (1x) Ethernet port.
– (1x) USB port (type B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (3x) TTL ports.
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– WebServer capacity
– Industrial Protocols
Outputs (Arduino Mega included)
– 25 Outputs:
(7x) Relay outputs (220Vac – 5A)
(8x) Analog (0-10Vdc, 8bit ) / Digital (5-24Vdc) Outputs / PWM Isolated (5-24Vdc)
(10x) Digital Isolated (5-24Vdc)
Other technical specifications
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
µSD Socket (using SPI port, chip select D53 pin).
DIN Rail mounting.
Max consum.: 1.2A
Flash Memory: 256kB (8kB for bootloader)
SRAM: 8kB
EEPROM: 4kB
Clock Speed: 16MHz
*Rx, Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
Arduino PLC based details
Industrial Automation
Modular PLC Arduino
This is the first equipment based on Arduino technology and designed for a professional use. This industrial PLC has 57I/Os. It also contains several communication ports which provide more flexibility and control. The industrial controller M-DUINO family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…
Programming Software
This controller arduino can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free. A ladder logic option will be available soon.
Instantaneous connection and coding
The industrial arduino M-DUINO is programmed through the USB ports. This open source based PLC can also be programmed through Ethernet port remotely. This offers an immediate access to the program, maintaining control. Also, you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox PLC Range and the Touchberry Pi with an instantaneous connection.
Inputs ▼
| Total Inputs | 32 |
| Total Digital Optoisolated Inputs (5-24Vdc) | 16 |
| Digital Optoisolated Inputs (5-24Vdc) | 10 |
| Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc) | 6 |
| 10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software | 16 |
Outputs ▼
| Total Outputs | 25 |
| Digital Optoisolated Outputs (5-24Vdc) | 10 |
| Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch | 8 |
| Relay Outputs (220Vac - 5A) | 7 |
Communications ▼
| Ethernet communication | 1 |
| Wi-Fi & BLE (Bluetooth Low Energy) | NO |
| GPRS/GSM | NO |
| LoRa | NO |
| DALI | NO |
| USB port (type B) communication (for uploading or debugging only) | 1 |
| Micro USB port (type B) communication (for uploading or debugging only) | 0 |
| I2C communication (interface with other Industrial Shields, sensors, I/Os modules) | 1 |
| Serial TTL (UART) communication | 2 |
| RS-232 communication | 1 |
| Half/Full Duplex RS-485 communication | 1 |
| SPI external port communication (using MOSI, MISO, SS pins of Arduino) | 1 |
| RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) | YES |
| µSD Socket (using SPI port, chip select D53 pin) | YES |
The Open Source Board CPU ▼
| Single Board Computer (SBC) Microcontroller | Arduino Mega Original Board (ATmega 2560) |
| Flash Memory (KB) | 256 |
| Flash Memory of which used by bootloader (KB) | 8 |
| SRAM (KB) | 8 |
| EEPROM (KB) | 4 |
| Clock Speed (MHz) | 16 |
Certification & Safety ▼
| Conformity with Health, Safety, and Environmental Protection (CE) | EN61010-1 | EN61010-2-201 | EN61131-2:2007 (Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity) |
| Medical Devices Directive (CE) | 93/42/EEC |
| FCC Federal Code of Regulation (CFR) for Electronic Equipment | EMC:FCC Part 15 |
| RoHS | Directive 2002/95/EC | Restriction of Hazardous Substances (EEE) |
Other information ▼
| PLC measures | 101X119.5x119.3 |
| DIN Rail mounting | |
| Max. consum. | 1.5A |
| Power Supply Voltage (Vdc) Range | 12-24 |
| Power Consumption (VAC max.) | 30 |
| Operating Temperture ºC | 0ºC-60ºC |
| Operating Temperature ºF | 32ºF-140ºF |
| Operating Relative Humidity % (no condensation) | 10%-90% |
| Package Size | 13cm x 14cm x 8cm |
| Packaging | Box |
| ECCN Number | EAR99H |
| HTS Code | 8537.10.10.90 |
| 740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued | §740.17 (b)(1) |
| Country of Origin | Spain |
| STATIC Sensitive | NO |
| Moisture Sensitivity Level (MSL) | MSL 1 - Unlimited |
| Lead Free | |
| RoHS Compliant by Exemption? | NO |
| Does Part Contain Lithium? | YES |
| Product Weight | 661g. |
Other Technical Specifications: *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino).
How to start ▼
| 1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it. |
| 2. Click on "File" and then on "Preferences". |
| 3. See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json |
| 4. Close the preferences window with the “Ok” button. |
| 5. Click on “Tools” menu , and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window. |
| 6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version. |
| 7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact [email protected] if you have any questions." |