PLC Arduino ARDBOX 20 I/Os Analog HF Modbus & Power Supply (12Vdc,30W)

PLC Arduino ARDBOX 20 I/Os Analog HF Modbus & Power Supply (12Vdc,30W)

    152.25 € 152.25 € 152.25 EUR

    152.25 €

    10 Inputs (5 to 24Vdc):
    Analog (0-10Vdc) and Digital (5 to 24Vdc) inputs
    10 Outputs (5 to 24Vdc)
    Analog (0-10Vdc) and Digital/PWM Isolated (5 to 24Vdc)

    USB, RS485, RS232, Half-Full Duplex (Modbus), I2C, SPI

    Compact DIN rail power supply. Assembled on 35mm DIN Rail:

    Power supplies provide parallel operation, overvoltage protection, and overcurrent protection. There is a LED inductor for power status, the power supply is certified according to UL.

    This combination does not exist.

    Add to Cart
    090001000100 090001000100
    SKU: 090001000100
    HS CODE: 8537.10.9160


    Inputs, Outputs, Communications and other technical specifications

    Inputs (Arduino Leonardo included)

    – 10 Inputs:

    (10x) Digital (5-24Vdc).

    (6x) of 10x, Analog (0-10Vdc) configurable by Software.


    – (1x) USB port.

    – (1x) RS-485 Half / full Duplex (Modbus connection available between devices), RS-232

    – (1x) I2C*

    – (1x) SPI*

    * See pinout to use communications ports because the number of inputs / outputs can be reduced.



    Outputs (Arduino Leonardo included)

    – 10 Outputs:

    (10x) Digitals isolated (5 to 24Vdc)/ (6x) of 10x, PWM (5 to Vdc) outputs, configurables by Switch1.

    (7x) of 10x, Analog 0-10V output. configurables by Switch.

    Other technical specifications

    Pot: 30W

    Flash memory: 32kB of wich 4kB used by bootloader.

    SRAM: 2,5kB

    EEPROM: 1kB

    Clock Speed: 16MHz

    *Read the manual to set the signal type.

    Arduino PLC based details

    Industrial Automation

    Arduino-based PLC
    It has 20 digital inputs / outputs. 10x analog or digital inputs (see specifications), and 10x digital or analog output (see especifications).

    Basic Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection.

    Instant connection and programming
    The Basic Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB. This feature lets an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipment without no limits.

    Standarised modules
    The different Basic Controllers devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured using the same methodology.

    Using the I2C connection, that all the Basic Controllers family have, you can connect up to 127 modules, which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection. NOTE: for I2C you need to tell us that requirement.

    Flexible and dynamic
    All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C.

    Watch the PLC Arduino features video


    Recently viewed Products