PLC Ethernet Reconnection

Industrial Arduino PLC reconnection to the server
July 10, 2019 by
PLC Ethernet Reconnection
Boot & Work Corp. S.L., Quesada Dani Salvans

Introduction

This post shows how to reconnect your PLC Arduino to the server that it is usually connected to. This solution works for different related kinds of issues; on the one hand, if the server starts later than the Arduino controller and the PLC controller shows clear signs of connection errors and, on the other hand, if the industrial PLC loses the connection with the server at any time.


Solution

Code

/*
   Copyright (c) 2019 Boot&Work Corp., S.L. All rights reserved
   This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version. This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ #if defined(MDUINO_PLUS)
#include <Ethernet2.h>
#else
#include <Ethernet.h>
#endif // PLC MAC address
byte mac[] = {0xBE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
IPAddress plcAddress(10, 10, 10, 2); // Server IP address and TCP port
IPAddress serverAddress(10, 10, 10, 1);
const uint16_t serverPort = 6543; // Ethernet client
EthernetClient client; ////////////////////////////////////////////////////////////////////////////////////////////////////
void setup() {
Serial.begin(9600L);
Serial.println("ethernet-reconnect started"); Ethernet.begin(mac, plcAddress); Serial.print("IP address: ");
Serial.println(Ethernet.localIP());
} ////////////////////////////////////////////////////////////////////////////////////////////////////
void loop() {
// Update client connection status
updateConnectionStatus();
} ////////////////////////////////////////////////////////////////////////////////////////////////////
void updateConnectionStatus() {
static uint32_t lastReconnectionTime = 0UL; // Reconnect to server if not connected
if (!client.connected()) {
// Prevent fast reconnections
if (millis() - lastReconnectionTime > 1000) {
Serial.println("Client is not connected to server");
reconnect(); // Update last reconnection time to prevent fast tries
lastReconnectionTime = millis();
}
}
} ////////////////////////////////////////////////////////////////////////////////////////////////////
void reconnect() {
// Force client disconnection
client.stop(); // Connect to server
Serial.println("Trying to connect...");
client.connect(serverAddress, serverPort); // Check connection status
if (client.connected()) {
Serial.println("Client connected to server");
} else {
Serial.println("Impossible to connect to server");
}
}


Explanation

Having a look at the code solution we can see that, first of all, there is a function that updates the connection status every moment, reconnecting to the server if is not even connected. This function tries to reconnect to the server every 1 second, but this is an arbitrary time and you can change it as you want (it is good to set a time of at least 1 second to not overcharge the server connection). This one uses another function called "reconnect()" which forces client disconnection, connects to the server  and checks connection status.

How to upload this code

If you want to upload this code on your controller Arduino you have to follow these steps:
 1.-Select Tools > Board > M-Duino Family (or your working shield but considering that it has to have Ethernet or the Wifi module). Check that the Arduino Boards of Industrial Shields are correctly installed.

Step 1 - Upload the code
  

2.-Select Tools > Industrial Shields > M-Duino 21+ (or your working Arduino Automation shield model but considering that it has to have Ethernet or the Wifi module).

 
Step 2 - Upload the code


3.-Select Tools > Port > COM65 (or the port where you have your device connected).

Step 3 - Upload the code


4.-Upload the program. Click on the arrow located on the left top of the window.

Step 4 - Upload the code


5.- If everything is working right, your problems should be solved as we saw in the previous sections and, if you want to check out all the processes you can see the confirmation messages (as "ethernet-reconnect started", "IP address: ", "Client connected to server", etc.) in the serial monitor. The Serial Monitor icon is located in the right top corner of the window (make sure to configure the baud rate to 9600 to sync up with the code configuration).

Step 5 - Upload the code

 

​Search in our Blog

PLC Ethernet Reconnection
Boot & Work Corp. S.L., Quesada Dani Salvans July 10, 2019

Looking for your ideal Programmable Logic Controller?

Take a look at this product comparison with other industrial controllers Arduino-based. 

We are comparing inputs, outputs, communications and other features with the ones of the relevant brands.


Industrial PLC comparison >>>