Hi, I'm trying to get a weather station to communicate with my touchberry 7 " via rs485, I set the jumper to half duplex and the two jumpers in point 2.2 of your manual as RS485 configuration, I connected data + on A and data- on B, on node red I using the serial in node set as the weather station booklet (9600 baud, 8 data bits, no parity, 1 bit stop) the interface is / dev / ttyS0 as your manual. When I power on the meteo station I must receive a series of characters but I am not receiving anything. Am I doing something wrong or forgetting something?
Welcome!
This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
Esta pregunta ha sido marcada
La pregunta ha sido cerrada por razón: no relevante u obsoleta
por Ricard Franch Argullol el 03/07/2023 05:19:10
por Ricard Franch Argullol el 03/07/2023 05:19:10
797
Vistas
¿Le interesa esta conversación? ¡Participe en ella!
Cree una cuenta para poder utilizar funciones exclusivas e interactuar con la comunidad.
Inscribirse