It would be great if we could attach a JTAG debugger to the PLC, it appears that the SPI bus that is exposed is VSPI and not the HSPI bus that we typically connect a JTAG debugger to on other ESP32 boards. When I look inside of the shield there are a few headers on the board that I'm curious if any (maybe CONN11?) are used for JTAG debugging. If so, any chance you could provide guidance on what pins are mapped to those headers and how to properly configure debugging?
Welcome!
This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
Esta pregunta ha sido marcada
1
Responder
2269
Vistas
Hi,
None of the pins nor headers are prepared for JTAG debugging at all, although it would be great to know if it works using VSPI.
Regards,
Bernat
¿Le interesa esta conversación? ¡Participe en ella!
Cree una cuenta para poder utilizar funciones exclusivas e interactuar con la comunidad.
Inscribirse