I am looking to buy a PLC to automate an industrial process, but I need two types of communication RS232 and RS485, can I use the two buses at the same time?
Welcome!
This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
Esta pregunta ha sido marcada
1
Responder
3334
Vistas
Hi Andrés. Of course you can use RS485 and RS232 at the same time using the Ardbox Analog. It is only necessary to know that because of the PLC is using Arduino Leonardo the UART serial available on that Arduino board is Pin0 or Pin1, Working as a Hardware Serial. So if you need to configure both communication ports, one of the will use Software serial using SPI pins as a serial TTL.
The configuration is done by jumper inside the PLC and configuring some switch (as you can see on the Ardbox pictures).
See an example of use at the following posts:
¿Le interesa esta conversación? ¡Participe en ella!
Cree una cuenta para poder utilizar funciones exclusivas e interactuar con la comunidad.
Inscribirse| Publicaciones relacionadas | Respuestas | Vistas | Actividad | |
|---|---|---|---|---|
|
1
ago 20
|
2928 | ||
|
1
jul 23
|
1633 | ||
|
2
mar 21
|
6651 | ||
|
3
ene 21
|
3481 | ||
|
0
jul 23
|
719 |