This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
I loaded micropython to them, and would like to use the ethernet adapter. The manual says it's a W5500. In order to setup the W5500 in micropython I need to know which pins the chip select and reset are connected to on the ESP32?
Also, please confirm if it uses the hardware SPI peripheral on the ESP32.
Very excited about your modules! Just purchased and received 3 of these to test, and with success will deploy many more at our work. We like micropython.
Thanks!
The chip select is connected to GPIO 15, and it seems that the reset pin is not connected to anything.
The PLC uses the hardware SPI peripheral on the ESP32.
Cree una cuenta para poder utilizar funciones exclusivas e interactuar con la comunidad.
Inscribirse| Publicaciones relacionadas | Respuestas | Vistas | Actividad | |
|---|---|---|---|---|
|
1
sept 20
|
3353 | ||
|
1
sept 23
|
2435 |