I'm trying to drive an USB device with my MDuino PLC... For doing that i have tried to connect my USB cable like a serial connection.
I have connected the USB Data+ on the Serial RX while the USB Data- is on the Serial TX. Is this the way to do it?
Welcome!
This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
Esta pregunta ha sido marcada
1
Responder
4609
Vistas
In order to achieve this communication, you need to connect the USB wiring:
USB data- on TX1, USB data+ on RX1 and finally the GND wire to the PLC to have the same GND reference (Usially is the black wire).
Then check that Serial1 is activated on the Switch configuration pins, TX1 and RX1 at OFF position (check the user manual if you don't find them).
After setting the PLC with this connections and having it connected (12/24 Vdc), it must work for your requirements,
Thank you very much for contacting us.
¿Le interesa esta conversación? ¡Participe en ella!
Cree una cuenta para poder utilizar funciones exclusivas e interactuar con la comunidad.
Inscribirse| Publicaciones relacionadas | Respuestas | Vistas | Actividad | |
|---|---|---|---|---|
|
2
abr 21
|
3043 | ||
|
2
ago 21
|
3046 | ||
|
1
jul 23
|
2375 | ||
|
1
ago 20
|
2980 | ||
|
1
jun 20
|
3309 |