|| Back to Support & Help Documentation ||

M-Duino I/Os

                                    M-Duino Family Pinout



                                    General I/Os features



                                    M-Duino A Zone.

                                    • Connections:



                                    Note: Chip Select pins. These pins can act as TTL, so they can work for the Chip Select pin of any device.





                                    Note: Autoreset. Arduino mega has auto reset when using serial communication code. Set switch to OFF when using serial communication. When uploading code to Arduino Mega set switch to ON. 


                                    M-Duino B Zone:

                                    • Analog Shield (B Zone):



                                    • Relay Shield (B Zone):

                                     


                                    M-Duino C Zone:

                                    • Analog Shield (C Zone):





                                    • Relay Shield (C Zone):