SPARTAN ARDUINO PLC 16RDA
SPARTAN ARDUINO PLC 16RDA
The Spartan family was created from the analysis of our top selling products.
The sum of the most common configuration among our customers and the optimization of production processes results in a fully functional, robust and reliable equipment, designed for industrial environment and at a very low cost.
Inputs, Outputs, Communications and other technical specifications
Inputs (Arduino Leonardo included)
– 8 Inputs:
(8x) Digital (5-24Vdc).
(6x) of 8x, Analog (0-10Vdc) configurable by Software.
– (1x) USB port.
– (1x) RS485 - Modbus (RTU)
– (1x) I2C*
– (1x) SPI*
* See pinout to use communications ports because the number of inputs / outputs can be reduced.
Outputs (Arduino Leonardo included)
– (6x) Relay Outputs ( 220 VAC - 5A)
Other technical specifications
Flash memory: 32kB of wich 4kB used by bootloader.
Clock Speed: 16MHz
*Read the manual to set the signal type.
Spartan Arduino PLC details
It has 16 digital inputs / outputs. 8x analog or digital inputs (see specifications), and 8x digital or analog output (see especifications).
Spartan Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection.
Instant connection and programming
The Spartan Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB. This feature lets an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipment without no limits.
The Spartan Controllers devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured using the same methodology.
Using the I2C connection, that all the Spartan Controllers family have, you can connect up to 127 modules, which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection. NOTE: for I2C you need to tell us that requirement.
Flexible and dynamic
All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C.
Digital Optoisolated Inputs (5-24Vdc)
Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc)
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software
Inputs notes - * From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In) * From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)
|Digital Optoisolated Outputs (5-24Vdc)||0|
|Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch||0|
|Relay Outputs (220Vac – 5A)||6|
|Ethernet communication – 0|
|USB port (type B) communication (for uploading or debugging only) – 1|
|Serial TTL (UART) communication – 1|
|I2C communication – 1|
|Half Duplex RS-485 communication – 1|
The Open Source Board CPU ▼
|Single Board Computer (SBC) Microcontroller||Arduino Leonardo|
|Flash Memory (KB)||32|
|Flash Memory of which used by bootloader (KB)||4|
|Clock Speed (MHz)||16|
Certification & Safety ▼
|Conformity with Health, Safety, and Environmental Protection (CE)EN61010-1 | EN61010-2-201 | EN61131-2:2007 (Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)|
|Medical Devices Directive (CE): 93/42/EEC|
|FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15|
|RoHS: Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)|
|UL: STD 61010-2-201 and UL STD 61010-1 | Certified to CSA Std. C22.2 No. 61010-1 | Certified to CSA Std. C22.2 No.61010-2-201 | 5016476|
|NCAGE (Commercial and Government Entity Code – Department of Defense): NCAGE 99SGB | Commercial and Government Entity Code | Boot&Work Corp SL Industrial Shields|
Other information ▼
|PLC measures: 101x119.5x119.3|
|DIN Rail mounting|
|Max. consum.: 1.2A|
|Power Supply Voltage (Vdc) Range: 12-24|
|Power Consumption (VAC max.): 30|
|Operating Temperture C: 0C-60C|
|Operating Temperature F: 32F-140F|
|Operating Relative Humidity % (no condensation): 10%-90%|
|Package Size: 13cm x 14cm x 8cm|
|ECCN Number: EAR99H|
|HTS Code: 8518.104.22.168|
|740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued: §740.17 (b)(1)|
|Country of Origin: Spain|
|STATIC Sensitive: No|
|Moisture Sensitivity Level (MSL): MSL 1 - Unlimited|
|RoHS Compliant by Exemption? No|
|Does Part Contain Lithium? Yes|
|Product Weight: 464 gram|
|Buy online or through our distributors (see the menu).|
How to start ▼
|1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.|
|2. Click on "File" and then on "Preferences".|
|3. See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json|
|4. Close the preferences window with the “Ok” button.|
|5. Click on “Tools” menu, and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window.|
|6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version.|
|7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact [email protected] if you have any questions."|