PLC ARDUINO ARDBOX ANALOG WiFi & BLE
PLC ARDUINO ARDBOX ANALOG WiFi & BLE
Description
Inputs, Outputs, Communications and other technical specifications
Inputs (Arduino Mega included)
– 10 Inputs:
(8x) Analog Inputs (0-10Vdc, 10bit) / Digital Inputs (5-24Vdc) configurable by software.
(2x) Isolated Digital Inputs (5-24Vdc)
(1x) Interrupt Inputs (5-24Vdc). "Can work like Digital Input (5-24Vdc)
Communications
- (1x) WiFi & Bluetooth LE (based on ESP32)
– (1x) USB port (Micro USB-B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– Modbus RTU
– Industrial Protocols
Outputs (Arduino Mega included)
– 10 Outputs:
(3x) Digitals isolated (5 to 24Vdc)/ (6x) of 10x, PWM (5 to Vdc) outputs, configurables by Switch1.
(7x) of 10x, Analog 0-10V output. configurables by Switch.
Other technical specifications
100x45x115mm
DIN Rail mounting.
Max consum.: 1.2A
Flash Memory: 32kB (4kB for bootloader)
SRAM: 2.5kB
EEPROM: 1kB
Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
Arduino PLC based details
Industrial Automation
Modular PLC
This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 20I/Os. It also contains several communication ports which provide more flexibility and control. The GPRS Controllers family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…
Programming Software
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.
Instantaneous connection and coding
The GPRS Controller is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox , M-duino and the Touchberry Pi with an instantaneous connection.
Watch the PLC Arduino features video
Inputs ▼
| Total Entradas | 10 |
| Entradas Digitales Optoaisladas (5-24Vdc) | 1 |
| Digitales Optoaisladas Inputs (5-24Vdc) | entradas que pueden trabajar como interruptor INT (5-24Vdc) | 1 |
| Entradas 10 bit Analógicas (0-10V) | Digitales (5-24Vdc) entradas configurables mediante software | 8 |
Notas de entrada - * Desde el (Xx) Digital, (Yx) se puede configurar como Analógico (Xx = Entrada digital total, Yx = Número de entrada analógica) * Desde el (Xx) Digital, (Zx) se puede configurar como Interrupción ( Xx = Entrada digital total, Zx = Número de pines de interrupción)
Outputs ▼
| Salidas Totales | 10 |
| Digital Optoaisladas Salidas (5-24Vdc) | 3 |
| Digital Optoaisladas y PWM (5-24Vdc) | 8 bit Analógicas (0-10V) Salidas configurables mediante switch | 7 |
| Salidas Relé (220Vac - 5A) | 0 |
Communications ▼
| Ethernet communication | NO |
| Wi-Fi & BLE (Bluetooth Low Energy) | YES |
| GPRS/GSM | NO |
| Comunicación del puerto USB (tipo B) (solo para cargar o depurar) - 0 | 0 |
| Comunicación del puerto Micro USB (tipo B) (solo para cargar o depurar) - 1 | 1 |
| Comunicación I2C (interfaz con otros Industrial Shields, sensores, módulos I/Os) - 1 | 1 |
| Serial TTL (UART) communication | 0 |
| RS-232 communication | 1 |
| Comunicación Half/Duplex RS-485 - 1 | 1 |
| SPI comunicación de puerto externo (usando MOSI, MISO, pines SS de Arduino) - 0 | 0 |
| RTC (Reloj de tiempo real. NOTA: Puerto I2C utilizado. Ver modificación de pinout) - NO | NO |
| Enchufe µSD (usando el puerto SPI, el chip selecciona el pin D53) - NO | NO |
The Open Source Board CPU ▼
| Single Board Computer (SBC) Microcontroller | Arduino Leonardo Original Board (ATmega32u4) |
| Flash Memory (KB) | 32 |
| Flash Memory of which used by bootloader (KB) | 4 |
| SRAM (KB) | 2,5 |
| EEPROM (KB) | 1 |
| Clock Speed (MHz) | 16 |
Certification & Safety ▼
| Conformity with Health, Safety, and Environmental Protection (CE) | EN61010-1 | EN61010-2-201 | EN61131-2:2007 (Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity) |
| Medical Devices Directive (CE) | 93/42/EEC |
| FCC Federal Code of Regulation (CFR) for Electronic Equipment | EMC:FCC Part 15 |
| RoHS | Directive 2002/95/EC | Restriction of Hazardous Substances (EEE) |
Other information ▼
| PLC measures | 100x45x115 |
| DIN Rail mounting | |
| Max. consum. | 1.5A |
| Power Supply Voltage (Vdc) Range | 12-24 |
| Power Consumption (VAC max.) | 30 |
| Operating Temperture ºC | 0ºC-60ºC |
| Operating Temperature ºF | 32ºF-140ºF |
| Operating Relative Humidity % (no condensation) | 10%-90% |
| Package Size | 13cm x 14cm x 8cm |
| Packaging | Box |
| ECCN Number | EAR99H |
| HTS Code | 8537.10.10.90 |
| 740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued | §740.17 (b)(1) |
| Country of Origin | Spain |
| STATIC Sensitive | NO |
| Moisture Sensitivity Level (MSL) | MSL 1 - Unlimited |
| Lead Free | |
| RoHS Compliant by Exemption? | NO |
| Does Part Contain Lithium? | NO |
| Product Weight | 321g. |
Otras especificaciones técnicas: * Los pines Rx, Tx no están disponibles con RS485. Para SPI, debe elegir otro pin para la función Seleccionar (puede elegir, SDA, SCL, Rx, Tx, Pines de Arduino)
How to start ▼
| 1. Descarga el software de código abierto "Arduino IDE" versión 1.8.0 o superior y ábrelo. |
| 2. Haz clic en "Archivo" y luego en "Preferencias". |
| 3. Consulta el cuadro de texto "URL adicionales del administrador de tableros:" dentro de la pestaña "Configuración" y agrega esta URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json |
| 4. Cierra la ventana de preferencias con el botón “Aceptar”. |
| 5. Haz clic en el menú “Herramientas”, abre el submenú “Tableros” y haz clic en la opción “Administrador de tableros” para abrir el Ventana Administrador de tableros. |
| 6. Busca “industrialshields” en el filtro de búsqueda y selecciona en la lista y haz clic en “Instalar” o "Actualizar" si no tienes la última versión. |
| 7. Cierra el "Administrador de tableros". Ahora puedes seleccionar cada uno de nuestros PLC haciendo clic en "Herramientas", luego en "Placa", luego en "Placas Industrial Shields" y selecciona su familia de PLC. Ponte en contacto con [email protected] si tienes alguna pregunta". |