PLC ARDUINO ARDBOX 20 I/Os ANALOG HF MODBUS & WiFi & BLUETOOTH LE
Inputs, Outputs, Communications and other technical specifications
Inputs (Arduino Mega included)
– 10 Inputs:
(10x) Digital (7-24Vdc).
(6x) of 10x, Analog (0-10Vdc) configurable by Software.
- (1x) WiFi & Bluetooth LE (based on ESP32)
– (1x) USB port (Micro USB-B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– Modbus RTU
– Industrial Protocols
Outputs (Arduino Mega included)
– 10 Outputs:
(10x) Digitals isolated (5 to 24Vdc)/ (6x) of 10x, PWM (5 to Vdc) outputs, configurables by Switch1.
(7x) of 10x, Analog 0-10V output. configurables by Switch.
Other technical specifications
DIN Rail mounting.
Max consum.: 1.2A
Flash Memory: 32kB (4kB for bootloader)
Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
Arduino PLC based details
This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 20I/Os. It also contains several communication ports which provide more flexibility and control. The GPRS Controllers family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.
Instantaneous connection and coding
The GPRS Controller is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox , M-duino and the Touchberry Pi with an instantaneous connection.
Watch the PLC Arduino features video
Total Digital Optoisolated Inputs (7-24Vdc)
Digital Optoisolated Inputs (7-24Vdc)
Digital Optoisolated Inputs (7-24Vdc) | can work like interrupt Inputs INT (7-24Vdc)
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software
Inputs notes - * From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In) * From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)
Digital Optoisolated Outputs (5-24Vdc)
Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch
Relay Outputs (220Vac - 5A)
|Ethernet communication - NO|
|Wi-Fi & BLE (Bluetooth Low Energy) - YES|
|GPRS/GSM - NO|
|USB port (type B) communication (for uploading or debugging only) - 0|
|Micro USB port (type B) communication (for uploading or debugging only) - 1|
|I2C communication (interface with other Industrial Shields, sensors, I/Os modules) - 1|
|Serial TTL (UART) communication - 0|
|RS-232 communication - 1|
|Half/Full Duplex RS-485 communication - 1|
|SPI external port communication (using MOSI, MISO, SS pins of Arduino) - 0|
|RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) - NO|
|µSD Socket (using SPI port, chip select D53 pin) - NO|
Communications notes - * When using I2C, 2 inputs are lost
The Open Source Board CPU ▼
Single Board Computer (SBC) Microcontroller
Arduino Leonardo Original Board (ATmega32u4)
Flash Memory (KB)
Flash Memory of which used by bootloader (KB)
Clock Speed (MHz)
Conformity with Health, Safety, and Environmental Protection (CE)
EN61010-1 | EN61010-2-201 | EN61131-2:2007(Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)
|Medical Devices Directive (CE): 93/42/EEC|
|FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15|
|RoHS: Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)|
|UL: STD 61010-2-201 and UL STD 61010-1 | expecting final auditory (tested)|
|NCAGE (Commercial and Government Entity Code - Department of Defense): NCAGE 99SGB |Commercial and Government Entity Code | Boot&Work Corp SL Industrial Shields|
Other information ▼
|PLC measures: 100x45x115|
|DIN Rail mounting|
|Max. consum.: 1.5A|
|Power Supply Voltage (Vdc) Range: 12-24|
|Power Consumption (VAC max.): 30|
|Operating Temperture C: 0C-60C|
|Operating Temperature F: 32F-140F|
|Operating Relative Humidity % (no condensation): 10%-90%|
|Package Size: 13cm x 14cm x 8cm|
|ECCN Number: EAR99H|
|HTS Code: 85126.96.36.199|
|740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued: §740.17 (b)(1) |
|Country of Origin: Spain|
|STATIC Sensitive: N|
|Moisture Sensitivity Level (MSL): MSL 1 - Unlimited|
|RoHS Compliant by Exemption? NO|
|Does Part Contain Lithium? N|
|Product Weight: 321 gram|
|Buy online or through our distributors (see the menu).|
We ship using DHL.
You will receive your goods in 24-72 (Europe), 3-5 days for rest of the World.
Other Technical Specifications: *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
How to start ▼
|1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.|
|2. Click on "File" and then on "Preferences".|
|3. See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json|
|4. Close the preferences window with the “Ok” button.|
|5. Click on “Tools” menu , and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window.|
|6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version.|
|7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact email@example.com if you have any questions."|