M-DUINO PLC ARDUINO ETHERNET & GPRS 58 I/Os Analog/Digital PLUS
Inputs, Outputs, Communications and other technical specifications
Inputs (Arduino Mega included)
– 33 Inputs:
(16x) Analog Inputs (0-10Vdc) / Digital Inputs (5-24Vdc) configurable by software.
(17x) Isolated Digital Inputs (5-24Vdc) - (3x of which can work as Interrupt Input)
- (1x) GPRS/GSM (based on SIM800L)
– (1x) Ethernet port.
– (1x) USB port (type B).
– (1x) I2C port. (Interface with other Industrial Shields, sensors, I/Os modules)
– (1x) RS-232 port.
– (1x) HALF/FULL Duplex RS-485 port.
– (1x) SPI external port (Using MOSI, MISO, SS pins of Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– WebServer capacity (just through Ethernet)
– Industrial Protocols
Outputs (Arduino Mega included)
– 22 Outputs:
(22x) Isolated Digital Outputs (5-24Vdc) / (8 of which) PWM configurable by software.
(8 of which) Analog Outputs (0-10Vdc)
Other technical specifications
RTC (Real Time Clock. NOTE: I2C port used. See pinout modification)
µSD Socket (using SPI port, chip select D53 pin).
DIN Rail mounting.
Max consum.: 1.2A
Flash Memory: 256kB (8kB for bootloader)
Clock Speed: 16MHz
*For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
Arduino PLC based details
This is the first equipment based on the Arduino technology designed for a professional use. This PLC has 17I/Os. It also contains several communication ports which provide more flexibility and control. The GPRS Controllers family offers the possibility to expand up to 127 modules through I2C, which means that you can have until 7100 Inputs / Outputs in Master-Slave connections, additionally to sensors, etc…
This PLC can be programmed using the Arduino IDE platform. See the Documentation menu below to download the software for free.
Instantaneous connection and coding
The GPRS Controller is programmed through the USB ports. This PLC can also be programed through Ethernet port remotely. This offers and immediate access to program, mantain and control. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox , M-duino and the Touchberry Pi with an instantaneous connection.
Watch the PLC Arduino features video
Total Digital Optoisolated Inputs (5-24Vdc)
Digital Optoisolated Inputs (5-24Vdc)
Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc)
10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software
Inputs notes - * From the (Xx) Digital, (Yx) can be configured as Analog (Xx = Total Digital In, Yx = Number of Analog In) * From the (Xx) Digital, (Zx) can be configured as Interrupt (Xx = Total Digital In, Zx = Number of Interrupt pins)
Digital Optoisolated and PWM
(5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch
(220Vac - 5A)
|Ethernet communication - 1|
|Wi-Fi & BLE (Bluetooth Low Energy) - NO|
|GPRS/GSM - YES|
|USB port (type B) communication (for uploading or debugging only) - 1|
|Micro USB port (type B) communication (for uploading or debugging only) - 0|
|I2C communication (interface with other Industrial Shields, sensors, I/Os modules) - 1|
|Serial TTL (UART) communication - 1|
|RS-232 communication - 1|
|Half/Full Duplex RS-485 communication - 1|
|SPI external port communication (using MOSI, MISO, SS pins of Arduino) - 1|
|RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) - Yes|
|µSD Socket (using SPI port, chip select D53 pin) - Yes|
Communications notes - * When using I2C, 2 inputs are lost
The Open Source Board CPU ▼
Single Board Computer (SBC) Microcontroller
Arduino Mega Original Board (ATmega 2560)
Flash Memory (KB)
Flash Memory of which used by bootloader (KB)
Clock Speed (MHz)
Conformity with Health, Safety, and Environmental Protection (CE)
EN61010-1 | EN61010-2-201 | EN61131-2:2007(Clause 8: Zone A/B EMC and clause 11:LVD) | EN61000-6-4:2007 + A1 2011 (Emissions) | EN 61000-6-2:2005 (Immunity)
|Medical Devices Directive (CE): 93/42/EEC|
|FCC Federal Code of Regulation (CFR) for Electronic Equipment: EMC: FCC Part 15|
|RoHS: Directive 2002/95/EC | Restriction of Hazardous Substances (EEE)|
|UL:||STD 61010-2-201 and UL STD 61010-1 | Certified to CSA Std. C22.2 No. 61010-1 | Certified to CSA Std. C22.2 No.61010-2-201 | 5016476|
|NCAGE (Commercial and Government Entity Code - Department of Defense): NCAGE 99SGB |Commercial and Government Entity Code | Boot&Work Corp SL Industrial Shields|
Other information ▼
PLC measures :101x119.5x119.3
DIN Rail mounting
Max. consum.: 1.2A
Power Supply Voltage (Vdc) Range: 12-24
Power Consumption (VAC max.): 30
Operating Temperture C: 0C-60C
Operating Temperature F: 32F-140F
Operating Relative Humidity % (no condensation): 10%-90%
Package Size: 13cm x 14cm x 8cm
ECCN Number: EAR99H
HTS Code: 85188.8.131.52
740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued: §740.17 (b)(1)
Country of Origin: Spain
STATIC Sensitive: NO
Moisture Sensitivity Level (MSL): MSL 1 - Unlimited
RoHS Compliant by Exemption? NO
Does Part Contain Lithium? YES
Product Weight: 867g max.
Buy online or through our distributors (see the menu).
We ship using DHL.
You will receive your goods in 24-72 hours (Europe), 3-5 days for rest of the World
Other Technical Specifications: *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino)
How to start ▼
|1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it.|
|2. Click on "File" and then on "Preferences".|
|3. See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json|
|4. Close the preferences window with the “Ok” button.|
|5. Click on “Tools” menu , and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window.|
|6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version.|
|7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact email@example.com if you have any questions."|
Download Related Documentation here
Specifications for M-DUINO PLC ARDUINO ETHERNET & GPRS 58 I/Os Analog/Digital PLUS
|Main Technical Specs.|
|Digital Inputs *See technical details||35|
|Analog Inputs (Included as a Digitlal Input)||16|
|Digital Outputs *See technical details||22|
|Analog Outputs (Included as a Digitlal Output)||8|
|µSD Card Socket||Yes|