Welcome!

This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

0

Optoisolated Digital Input

By
Guest
on 6/27/18, 11:37 AM 106 views

Which models of Ethernet M-Duino are compatible with your Optoisolated Digital Input module, and the procedure for installing that module. Thank you!


0

Joan Froufe Ortega

--Joan Froufe Ortega--

1000000015
| 0 0 0
manresa, Spain
--Joan Froufe Ortega--
Joan Froufe Ortega
On 6/27/18, 11:48 AM
All the digital inputs of M-Duino Ethernet family are isolate, and ready to connect the module.

You can connect the module ( https://www.industrialshields.com/product/optoisolated-digital-input-module-12vdc-vdc-to-220vac-to-5-24vdc-converter/ ) as a normal device without any software.

Just connect its output to the PLC and connect the Vdc and the COM on the module with the desired value.

  • Flag

Hello... in my case I was able to wire my throttle signal by making a Y harness for the signal wire as you described and my system runs! This is on a light weight ebike. But I had a bit of a struggle at first and I was wondering if you have a solution? The second controller I used came with a throttle that has a Cut/Kill button and a battery meter light.

Timi Schor
on 12/20/18, 6:32 PM

Keep Informed

About This Community

This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together. Read Guidelines

Question tools

3 follower(s)

Stats

Asked: 6/27/18, 11:37 AM
Seen: 106 times
Last updated: 12/5/18, 1:53 PM