for connect SD card readr I have to connect MISO, MOSI, SCK and CS. Normally on CS I connect the pin 53, how can I do on your board, I see also switch on/off d53/SD... but don't understand how work.
This connectivity is already done internally in our equipments, so you don’t have to worry about this connectivity.
The onoly thing you need to set up is the switch of the D53(SD) to ON. Also you won’t be able to work with pin53 for another purpose. Pin 53 is related to output Q2.0.
I let you some examples on how to work with the microSD using our equipments:
About This Community
|Asked: 7/19/18, 2:05 PM|
|Seen: 283 times|
|Last updated: 12/5/18, 1:50 PM|