Arduino Starter Kit 0: ARDBOX PLC + Power Supply + Wire
Are you a company? This is for You! ✅
DetailsReference :
IS.AB20AN.HF+24V30WInputs
6x 10 bit Analog
10x Digital Optoisolated
Outputs
7x 10 bit Analog
10x Digital Isolated
Industrial Communications
I2C, RS232, RS485 SPI, ...
Description
Inputs, Outputs, Communications and other technical specifications
Inputs (Arduino Leonardo included)
– 10 Inputs:
(10x) Digital (5-24Vdc).
(6x) of 10x, Analog (0-10Vdc) configurable by Software.
Communications
– (1x) USB port.
– (1x) RS-485 Half / full Duplex (Modbus connection available between devices), RS-232
– (1x) I2C*
– (1x) SPI*
* See pinout to use communications ports because the number of inputs / outputs can be reduced.
Outputs (Arduino Leonardo included)
– 10 Outputs:
(10x) Digitals isolated (5 to 24Vdc)/ (6x) of 10x, PWM (5 to Vdc) outputs, configurables by Switch1.
(7x) of 10x, Analog 0-10V output. configurables by Switch.
Other technical specifications
Pot: 30W
Flash memory: 32kB of wich 4kB used by bootloader.
SRAM: 2,5kB
EEPROM: 1kB
Clock Speed: 16MHz
*Read the manual to set the signal type.
Arduino PLC based details
Industrial Automation
Arduino-based PLC
It has 20 digital inputs / outputs. 10x analog or digital inputs (see specifications), and 10x digital or analog output (see especifications).
Basic Controllers family offers the possibility of communication between two computers using I2C obtaining a master-slave connection.
Instant connection and programming
The Basic Controllers family, as it uses an Arduino LEONARDO, lets you program it through the USB. This feature lets an immediate access in order to program, mantain and prepare it for its set up. It lets you to control your equipment without no limits.
Standarised modules
The different Basic Controllers devices are programmed exactly on the same way. Once you have used one of them, the rest can be configured using the same methodology.
Expandable
Using the I2C connection, that all the Basic Controllers family have, you can connect up to 127 modules, which it means that you can have up to 2.540 Input / Ouputs in Master Slave connection. NOTE: for I2C you need to tell us that requirement.
Flexible and dynamic
All the components are configurable both configure like make your jobs as Master or Slave when used on Master-Slave connection through I2C.
Watch the PLC Arduino features video
| Main Technical Specs. | |
|---|---|
| # Device # | PLC |
| # CPU Type # | Arduino |
| Inputs | |
| # Inputs # | 1-10 |
| Outputs | |
| # Outputs # | 1-10 |
