M-DUINO PLC ARDUINO DALI 19R
M-DUINO PLC ARDUINO DALI 19R
PLUS version include
Full/Half duplex RS485 port.
µSD Socket
Work directly with the SD memory card.
MODBUS RTU
Possibility to use MODBUS RTU using RS485 port working as a hardware Serial. - RTC (Real time clock available)
Descripción
Entradas, Salidas, Comunicaciones y especificaciones técnicas
Entradas (Incluidas Arduino Mega)
– 6 Entradas:
(4x) Analógicas (0-10Vdc) / Digitales (5-24Vdc) configurable mediante software.
(2x) Isolated Digital Inputs (7-24Vdc) (2 of which) can work as Interrupt Inputs (5-24Vdc)
Comunicaciones
– (1x) Puerto Ethernet.
– (1x) Puerto USB (type B).
– (1x) Puerto I2C port. (Para conectar con otros Industrial Shields, sensores, modulos I/Os)
– (3x) Puertos TTL.
– (1x) Puertos RS-232.
– (1x) Puerto HALF/FULL Duplex RS-485.
– (1x) Puerto SPI externo (Usa MOSI,MISO, SS pines de Arduino)
– TCP IP / Modbus TCP. / Modbus RTU
– Capacidad de WebServer
– Protocolos Industriales
Salidas (Incluidas Arduino Mega)
– 11 Salidas:
(3x) Analog Outputs (0-10Vdc) / Digital Outputs (5-24Vdc) / (3 of which) PWM configurable by software.
(8x) Relay Outputs (220 VAC - 5A)
Otras especificaciones técnicas
RTC (Real Time Clock. NOTA: Es necesario el uso del puerto I2C. Ver modificación en pinout E/S)
µSD Socket (usa puero SPI, selección de chip D53 pin).
100x75x115mm
Montaje en carril DIN
Máx consumo: 1.2A
Memoria Flash : 256kB (8kB para bootloader)
SRAM: 8kB
EEPROM: 4kB
Clock Speed: 16MHz
*Utilizar RS485 deshabilita los pines Rx, Tx utilizados. Para la comunicación SPI es necesário seleccionar otro pin como función SELECT. (Se pueden seleccionar los pines: SDA, SCL, Rx,Tx disponibles de la placa Arduino).
6 ENTRADAS
DIGITALES / ANALÓGICAS
11 SALIDAS
DIGITALES / ANALÓGICAS
COMUNICACIÓN
I2C, Ethernet, USB, RS485, RS232, SPI , DALI
Detalles del PLC Arduino
Controlador Arduino para automatización industrial: monitoreo, control de procesos y adquisición de datos
Autómata Modular
Este autómata basado en Arduino (Open Source Hardware) está especialmente diseñado para su uso en un entorno profesional. Este autómata dispone de 58 E/S1, también dispone de diferentes sistemas de comunicación lo que le ofrece una gran flexibilidad y control. El PLC M-DUINO ofrece la posibilidad de expandirse con 127 módulos mediante el sistema I2C, lo que significa que puede gobernar hasta 7100 E/S en modo maestro esclavo, además de módulos adicionales de sensores, etc.
Software de Programación
Se puede programar con la actual plataforma Arduino IDE.
Conexión y codificación instantáneas
El Arduino PLC M-DUINO se programa a través de los puertos USB. Este PLC industrial Arduino también se puede programar a través del puerto Ethernet de forma remota. Esto ofrece un acceso inmediato al programa, mantenimiento y control. También puede monitorear continuamente el estado de todas las variables, entradas, salidas, etc.
Es compatible con Ardbox PLC Range y Touchberry Pi con conexión instantánea.
Entradas ▼
| Total Inputs | 6 |
| Total Digital Optoisolated Inputs (5-24Vdc) | 2 |
| Digital Optoisolated Inputs (5-24Vdc) | 0 |
| Digital Optoisolated Inputs (5-24Vdc) | can work like interrupt Inputs INT (5-24Vdc) | 2 |
| 10 bit Analog Inputs (0-10V) | Digital (5-24Vdc) Inputs configurable by software | 4 |
Salidas ▼
| Total Outputs | 11 |
| Digital Optoisolated Outputs (5-24Vdc) | 0 |
| Digital Optoisolated and PWM (5-24Vdc) | 8 bit Analog (0-10V) Outputs configurable by switch | 3 |
| Relay Outputs (220Vac - 5A) | 8 |
Comunicaciones ▼
| Ethernet communication | 1 |
| Wi-Fi & BLE (Bluetooth Low Energy) | NO |
| GPRS/GSM | NO |
| LoRa | NO |
| DALI | 1 |
| USB port (type B) communication (for uploading or debugging only) | 1 |
| Micro USB port (type B) communication (for uploading or debugging only) | 0 |
| I2C communication (interface with other Industrial Shields, sensors, I/Os modules) | 1 |
| Serial TTL (UART) communication | 3 |
| RS-232 communication | 1 |
| Half/Full Duplex RS-485 communication | 1 |
| SPI external port communication (using MOSI, MISO, SS pins of Arduino) | 1 |
| RTC (Real Time Clock. NOTE: I2C port used. See pinout modification) | YES |
| µSD Socket (using SPI port, chip select D53 pin) | YES |
La CPU Open Source ▼
| Single Board Computer (SBC) Microcontroller | Arduino Mega Original Board (ATmega 2560) |
| Flash Memory (KB) | 256 |
| Flash Memory of which used by bootloader (KB) | 8 |
| SRAM (KB) | 8 |
| EEPROM (KB) | 4 |
| Clock Speed (MHz) | 16 |
Certificación & Seguridad ▼
| Conformity with Health, Safety, and Environmental Protection (CE) | EN61010-1 | EN61010-2-201 | EN61131-2: 2007 (Cláusula 8: Zona A / B EMC y cláusula 11: LVD) | EN61000-6-4: 2007 + A1 2011 (Emisiones) | EN 61000-6-2: 2005 (inmunidad) |
| Medical Devices Directive (CE) | 93/42/EEC |
| FCC Federal Code of Regulation (CFR) for Electronic Equipment | EMC:FCC Part 15 |
| RoHS | Directive 2002/95/EC | Restriction of Hazardous Substances (EEE) |
Otra información ▼
| PLC measures | 101X119.3x119.5 |
| DIN Rail mounting | |
| Max. consum. | 1.5A |
| Power Supply Voltage (Vdc) Range | 12-24 |
| Power Consumption (VAC max.) | 30 |
| Operating Temperture ºC | 0ºC-60ºC |
| Operating Temperature ºF | 32ºF-140ºF |
| Operating Relative Humidity % (no condensation) | 10%-90% |
| Package Size | 13cm x 14cm x 13cm |
| Packaging | Box |
| ECCN Number | EAR99H |
| HTS Code | 8537.10.10.90 |
| 740.17 Language - 740.17 (b)(1) for self-classification or (b)(3) CCATS issued | §740.17 (b)(1) |
| Country of Origin | Spain |
| STATIC Sensitive | NO |
| Moisture Sensitivity Level (MSL) | MSL 1 - Unlimited |
| Lead Free | |
| RoHS Compliant by Exemption? | NO |
| Does Part Contain Lithium? | YES |
| Product Weight | 599g. max. |
Other Technical Specifications: *Rx,Tx pins are not available using RS485. For SPI you need to choose another pin for Select Function (You can choose, SDA, SCL, Rx, Tx, Pins of Arduino).
Como empezar ▼
| 1. Download the open-source software "Arduino IDE" version 1.8.0 or higher and open it. |
| 2. Click on "File" and then on "Preferences". |
| 3. See the "Additional Boards Manager URLs:" text box inside the "Settings" tab and add this URL: http://apps.industrialshields.com/main/arduino/boards/package_industrialshields_index.json |
| 4. Close the preferences window with the “Ok” button. |
| 5. Click on “Tools” menu , and open the “Boards” submenu, and click the “Boards Manager” option, to open the Boards Manager window. |
| 6. Search “industrialshields” to the search filter and select to the list and click “Install” or "Update" if you have not got the latest version. |
| 7. Close the "Boards Manager". Now you can select each of our PLCs by clicking on "Tools", then "Board", then "Industrial Shields Boards" and select your family of PLCs. Contact [email protected] if you have any questions." |