Welcome!

This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

0

How to use the digital input IO_5

por
ADMIN
en 12/3/18 13:43 646 vistas

I trying to use the IO_5 or IO_6 as a normal digital input, but this input is interrupts enable, it’s possible to use that in input like IO_0.Because when i used digitalRead is doesn’t works


0
Industrial Shields Forum user

ADMIN

--ADMIN--

2506
| 1 0 1
Sant Fruitós de Bages, España
--ADMIN--
ADMIN
En 12/3/18 13:43

Hi Jean Claude,I0_5 and I0_6 can work as a normal input, but you must configure the wiring and the switch configuration properly. Take a look that these pins have a not commune GND. Also you must have the switches PIN2/I0.5 and PIN3/I0.6 to ON position (M-Duino PLUS version).With that you should can use digitalRead(pin) like any other normal input pin.Best regards,


Mantener informado

Acerca de esta comunidad

Esta comunidad es para profesionales y entusiastas de nuestros productos y servicios, compartir los mejores contenidos y nuevas ideas de marketing, construir su perfil profesional y mejorar el mercado para todos. Lea los lineamientos

Herramientas de las preguntas

2 seguidor(es)

Estadísticas

Preguntado: 12/3/18 13:43
Visto: 646 veces
Última actualización: 4/6/20 7:45