Busca en nuestro Blog. Encontrarás múltiples aplicaciones, soluciones, ejemplos de código. Navega utilizando la nube de etiquetas o busca utilizando criterios específicos

How to use the mapping pins of Industrial Shields Boards

Automation and control solutions with Open Source Hardware

In this post it is showed how to use the mapping pins of Industrial Shields boards. Before using these pins it is necessary to download the Industrial Shields boards. Follow the next link to download the boards

Industrial Arduino Mapping Pins

These boards provide you Industrial Shields PLC mapping. How it works?

For example with this boards it is not necessary to figure out what Arduino pin belong to the Industrial Shields PLC. Just using directly this PLC pin, Arduino IDE will arrange the mapping for you. To reference to the Industrial Shields Pins it must be typed like this:

Digital Outputs: QX_X

Analog Outputs: AX_X

Relay Output: RX_X

Inputs (regardless if it’s analog or digital): IX_X  

Next it is showed a sketch example:

// In this case is selected the M-DUINO 58 board
void setup() {
             }

////////////////////////////////////////////////////////////////////////////////////////
void loop() {
  // Toggle pins once a second
  digitalWrite(Q0_0, HIGH);
  digitalWrite(Q0_1, HIGH);
  //...
  analogWrite(A0_0, 255);
  analogWrite(A0_1, 528);
  //...
  digitalWrite(R0_0, HIGH);
  digitalWrite(R0_1, HIGH);
  //...
  delay(1000);

  digitalWrite(Q0_0, LOW);
  digitalWrite(Q0_1, LOW);
  //...
  analoglWrite(A0_0, 100);
  digitalWrite(A0_1, 0);
  //...
  digitalWrite(R0_0, LOW);
  digitalWrite(R0_1, LOW);
  //...

  delay(1000);
} 

See also:

INSTALLING INDUSTRIAL SHIELDS EQUIPMENT TO THE ARDUINO IDE

¿Quieres más informacion? 

¡Solo llena el formulario! 

¡Quiero saber más!  Por favor, llene el formulario correctamente.