Look for in our Blog. You will find multiple applications, solutions, code examples. Navigate using the tag cloud or search using specific criteria

Sixfab GPRS and Asus Tinker Board S communication

Connection

Introduction

In this post will be shown how to connect the Sixfab GPRS shield with the Asus Tinker board. 

The advantage of using Asus Tinker instead of Raspberry Pi is the number of UARTs. In the Asus board there are 4 UARTs while in the Raspberry Pi there is only 1. As Sixfab GPRS shield uses UART to communicate, in the ASUS board we still have 3 UARTs availables while in the Raspberry Pi UART communication is busy. So, all the configurations to disable the Serial communication an enable de UART to communicate with the sixfab GPRS described in Sixfab GPRS and Raspberry Pi 3 B+ bloc, are not required. 


Requeriments


Asus Tinker Board S

Sixfab GPRS 


Pins Connection


ASUS Tinker board of our equiptments: 


IMPORTANT: GPRS VDD EXT and GPRS POWERKEY are moved. Take a look at the Sixfab GPRS shield pinout (image below) and you will realize that POWERKEY and VDD EXT are pins 37 and 35 respectively. In our equipments these two pins are moved to pins 33 and 35 of Asus board. 



Resultado de imagen de Sixfab GPRS pinout


References 

Sixfab GPRS shield

ASUS Tinker Board

Do you want more information?

Open Source technology allows you to develop your installations.

Just fill the form and we will contact you as soon as we can.

Send