How to recalibrate your Raspberry Pi Touchscreen

Calibrate your industrial Touchberry Pi 10.1" Panel PC
May 17, 2019 by
How to recalibrate your Raspberry Pi Touchscreen
Boot & Work Corp. S.L., Support Team

Introduction


If you notice that the calibration of your Raspberry Pi industrial Panel PC does not perfectly match the size of your panel, you can follow the steps below to get the most accurate calibration of your touch panel. 

Odoo text and image block
Odoo image and text block

Requirements

  • Industrial Shields Panel PC  See the product >>
  • Raspbian / Linux iOS
  • a PC with Windows OS 
  • The calibration program (Must be downloaded in a Windows PC!) 


Calibration

To recalibrate your Touchberry Pi, please follow the steps below:


Download the image below. This image contains the actual screen measurements of your Touchberry Pi. It will serve as a model of the screen for tapping on the Touchberry screen.

        

  1. Once you have the image downloaded, copy it inside a USB and connect it in one of the x4 USB ports available in your Touchberry Panel HMI.                                                                                                                                                                                                      
  2. You must connect the Touchberry Pi usb to a PC with Windows operating system.

  3. Create a new folder and unzip the previously downloaded file (eGalaxTouch_5.12.0.10517-Release120717.rar).

  4. Start the program (setup.exe)

  5. Meanwhile in your Touchberry Pi unit, open the USB image previously downloaded. Once the program has started in your windows PC, you must press the keys in your Touchberry when when the PC screen asks you to do so. Make sure that you press the center of each red circle that appear on the Touchberry image. 

  6. Once you have finished pressing the red circles, save and exit the program. Your Touchberry Pi should now be calibrated. You will only need to reboot it.

If all the steps are done but the screen is not calibrated or the touch is not working,

please contact our technical service.

                        ​Search in our Blog

                        How to recalibrate your Raspberry Pi Touchscreen
                        Boot & Work Corp. S.L., Support Team May 17, 2019
                        Share this post

                        Looking for your ideal Programmable Logic Controller?

                        Take a look at this product comparison with other industrial controllers Arduino-based. 

                        We are comparing inputs, outputs, communications and other features with the ones of the relevant brands.


                        Industrial PLC comparison >>>