Look for in our Blog. You will find multiple applications, solutions, code examples. Navigate using the tag cloud or search using specific criteria

How to pause the execution of the code using Arduino IDE with microseconds

Introduction

In this post it will be seen how to pause the execution code for a certain time in microseconds.  Basically this function pauses the program for a certain time and after this time it continues as normal. 

The function for pause the execution code for a certain time in microseconds using Arduino IDE is delayMicroseconds()  This function is used to set a time of pause.


Requirements

Ethernet or 20 I/Os PLC:      Ethernet PLC     20 I/Os PLC     

 Industrial Shields boards:   Industrial Shields Boards


Function

delayMicroseconds(Microseconds)


Parameters

microseconds: time expressed in milliseconds -> 1000ms = 1 sec


Example

Code Example, blinking of an analog outputs every 0,5ms:

void setup() {
  pinMode(A0_5, OUTPUT); // configure A0.5 as OUTPUT
}

void loop() {
  analogWrite(A0_5, 0);
  delayMicroseconds(500);         // delay 0,5ms
  analogWrite(A0_5, 255); 
  delayMicroseconds(500);
}

Do you want more information?

Open Source technology allows you to develop your installations.

Just fill the form and we will contact you as soon as we can.

Send