Arduino based PLC Controller for Industrial Applications by Industrial Shields

Blogs

Arduino Industrial

Get in touch with us

I2C Scanner in industrial automation environment

** Introduction ** An *I2C bus* is a widely used communication system for internal connection between different devices. It is based on a main device ...

Boot & Work Corp. S.L., Guillem Cura Marti
— September 2020 — 227 views ArduinoPLC Communication I2C I2CScanner

How to work with an LCD using I2C in industrial automation

** Introduction ** A Liquid-Crystal Display (LCD) is a flat-panel display or other electronically modulating optical device that uses the light-modula...

Boot & Work Corp. S.L., Guillem Cura Marti
— September 2020 — 270 views Communication I2C LCD PLC Programming

Lighting Protocol DALI in a PLC Arduino

** Introduction ** In a modern lighting system, it is essential to have a system that can control and monitor all the lights at the same time, being a...

Boot & Work Corp. S.L., Guillem Cura Marti
— August 2020 — 373 views Arduino ArduinoPLC Communication Control DALI OpenSource hardware

The most used communications in each Industry sector

Previous reading * How to use communication protocols in industrial automation [1] * Introduction In this blog post you are going to learn where in th...

Boot & Work Corp. S.L., Berta Canet
— July 2020 — 599 views Arduino Communication Industry40 PLC

Communications and protocols used in industrial automation

** Introduction In this post you are going to learn the main  communications   * of our Industrial Shields' PLC Arduino and the  protocols *  the...

Boot & Work Corp. S.L., Berta Canet
— June 2020 — 1037 views Communication EthernetWifi GPRS Protocol RS232 RS485

Industrial Arduino board compared to Industrial Shields PLC

Introduction ** In this post we are going to make a comparison between an Arduino Mega board and a PLC Arduino M-Duino 21+, to see the main differen...

Andrei Postolache
— June 2020 — 1097 views Arduino Communication EthernetPLC IndustrialShields signals

How to use Modbus TCP Slave library with a plc controller arduino

Previous reading** *Modbus RTU Master library for industrial automation* * Read the post >> [1] * * To be able to follow easily the explanation of...

Bernat Garcia
— March 2020 — 13090 views Communication Modbus TCP/IP TOOLS40 arduino arduino plc

Learning the basics about RS485 of an industrial PLC

Introduction ** RS-485, also known as EIA-485, is defined as a differential multi-point bus system; it is perfect to transmit data with high speed t...

Andrei Postolache
— March 2020 — 785 views Arduino IDE Basics Communication arduino arduino plc rs-485

I2C Bus on PLC Arduino for industrial automation

* Introduction** In this post we will see the I2C bus, one of the communications available in our entire range of Arduino-based industrial controlle...

Boot & Work Corp. S.L., Support Team
— February 2020 — 1660 views Arduino Communication MDuino Master Slave ardbox bus scada

Bus SPI on PLC Arduino from Industrial Shields

* Introduction** In this post we will see the SPI bus, one of the communications available in our entire range of Arduino-based PLCs. The SPI bus is...

Boot & Work Corp. S.L., Support Team
— January 2020 — 1618 views Arduino Communication MDuino SPI Speed ardbox automation bus

Simplecomm library to send data through a PLC arduino stream

Introduction With the SimpleComm library you can send data through any Arduino Stream: RS-485, RS-232, Ethernet… It is enough flexible to support di...

Boot & Work Corp. S.L., Support Team
— October 2019 — 902 views Arduino Communication Frame Protocol SimpleComm

Communication System for industrial PLC Ardbox WiFi & BT

**Introduction** In this post, it will be explained how to set the communication system between an Ardbox WiFi & BT Family PLC Arduino and Module Wi...

Boot & Work Corp. S.L., Support Team
— October 2019 — 617 views Ardbox WIFI Communication Wifi Wifi Module Wireless

How to connect an Arduino based PLC with a OPC - Scada Compilant

**Introduction**** ** On this post it is showed how to connect an Arduino based PLC with any OPC SCADA compilant. To achieve it you can us...

Alejandro Jabalquinto
— January 2019 — 2320 views ArdboxAnalogHF ArdboxRelayHF Communication EthernetPLC OPC

How to connect a Bluetooth module to an Arduino based PLC

**Introduction** On this post it is showed how to connect a Bluetooth module, HC-05 on this example, to an Arduino based PLC. With all the Industria...

Alejandro Jabalquinto
— December 2018 — 1962 views ArduinoIDE Communication EthernetPLC bluetooth

Software for IoT Solutions

**Introduction** On this post it is showed different software that can be used as a IoT solutions with the Industrial Shields equipment. * * **Descr...

Alejandro Jabalquinto
— December 2018 — 1000 views 20IOs Communication EthernetPLC IoT PanelPC

Arduino GPRS SimCom - Sim900 - quadband - GMS Shield

**Introduction** On this post it is showed the basics to work with GPRS SIMCOM SIM900 quad band GSM shield fully compatible with Arduino. Requiremen...

Alejandro Jabalquinto
— December 2018 — 890 views ArduinoIDE Communication EthernetPLC GPRS SIM

How to use RS-232 on Industrial Arduino based PLC

**Introduction** In this post it is shown how to use RS232 on an Arduino based PLC of Industrial Shields. This post has been implemented for the M-D...

Alejandro Jabalquinto
— December 2018 — 1675 views 20IOs ArduinoIDE Communication EthernetPLC RS232

Serial communication between Raspberry and M-Duino/Ardbox

**Introduction** In this post it will be shown how to communicate using the serial between a MDuino/Ardbox and a Raspberry Pi. It actually exi...

Alejandro Jabalquinto
— December 2018 — 608 views ArduinoPLC Communication Raspberry Serial

Command Line Arduino Library

**Introduction   ** In this post it will be shown how to propperly work with the Command Line library. The library consists on adding a co...

Alejandro Jabalquinto
— December 2018 — 675 views ArduinoIDE ArduinoPLC Communication IndustrialShieldsLibraries Library Serial

Ethernet configuration from the EEPROM using the Command Line

**Introduction** In this post it will be shown how to configure the Ethernet parameters saved in the EEPROM: MAC address and DHCP/IP address. **Req...

Alejandro Jabalquinto
— December 2018 — 922 views ArduinoPLC Commandline Communication EEPROM EthernetPLC

Search our Blog

Take a look at our posts.

Remember that if you still have some questions, do not hesitate to contact with us using or email, chat, ticket or phone.

Use the SEARCH field below.

Stay updated :

Participate on our social stream.

Our Blogs

Archives