No products in the cart.
Documents & Files
Touch Screen based on LINUX OS incorporating a 10.1″ capacitive Touch Screen
The first Panel PC Linux with 10.1″ which uses a 64bits CPU for industrial environment.
Operative System and instantaneous configuration
This Panel PC mounts and GNU/Linux OS in its SD card. It has all types of connections:Ethernet, USB, Wifi1…
Also, as the OS is build-in in the SD card, it lets you duplicate and clone the configuration very easily.
Control your device status
Using the Ethernet port you can control from your desk all the parameters, data, input, output of your devices and equipment. Additionally this PC panel has as enough I/Os to avoid having to incorporate a PLC on simple automation and control designs.
With PANEL PC you can connect all the Industrial Shields devices in orer to obtain a complete industrial contorl all all your equipment, machinery, installations, etc…
For complex processes you can interconnect several PANEL PC. This lets you automate all the production plant and have on hand all the real time data.
Flexible and dynamic
It has the fastes startup system. Just insert the SD card, switch on, and that’s it!!! Thanks to the powerfull CPU technology you can configure all the PC from any other terminal without the need to be on the plant.
1 See technical specs
10.1” Resistive Multitouch LVDS, 315 nits, 170ºviewing angle,
i.MX6 Dual Lite, 64bit, 1GB @ 800Mbps
Puertos USB 2.0
2x (via hub USB integrado)
MIPI CSI connector which lets you install an RPF camera module
SD / MMC / SDIO slot
Conectividad de red
10/100 Ethernet (RJ-45)
Low level devices
8x GPIO, SPI, I2C, UART
Real time clock
Not available – see accessories
1.25A – 30W
12Vdc (5.5×2.5 Jack)